Delta DRS-24V30W1NZ Technical Data Sheet

TECHNICAL DATASHEET
Sync DIN Rail Power Supply
24V 30W 1 Phase (NEC Class 2) / DRS-24V30W1NZ
General Description
The ultra-compact and competitively priced Delta Sync DIN rail power supply series is designed for industrial applications requiring
highly reliable power supply within a tight space. The Sync series operates with universal AC input range and offers full power up to
55°C. The output is adjustable from 24-28 volts, and can support up to 3000 microfarads of load capacitance. A green LED indicates
output is present. All models in the series are certified according to IEC/EN/UL 60950-1 Information Technology Equipment (ITE),
IEC/EN/UL 62368-1 Audio/video, information and communication technology equipment and UL 508 Industrial Control Equipment
(ICE). The series is also fully compliant with RoHS Directive 2011/65/EU for environmental protection. NEC Class 2 and Limited Power
Source (LPS) approvals are available for this product.
Model Information
Sync DIN Rail Power Supply
Model Number
DRS-24V30W1NZ
Model Numbering
DR S –
DIN Rail Product Series
S – Sync Series
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
1
www.DeltaPSU.com (July 2019, Rev. 04)
Input Voltage Range
85-264Vac (120-375Vdc)
24V
30W
Output Voltage Output Power
Highlights & Features
Ultra compact size and galvanic isolation up to 3.0KVac
•
between input to output and input to ground
Universal AC input voltage and full power from -10°C to
•
+55°C operation
Up to 88.0% efficiency
•
• Low earth leakage current < 1.0mA @ 264Vac
Extreme low temperature cold start at -40°C
•
• NEC Class 2 / Limited Power Source (LPS) certified
Overvoltage / Overcurrent / Over Temperature Protections
•
• Certified according to IEC/EN/UL 62368-1
Safety Standards
CB Certified for worldwide use
Model Number:
Unit Weight:
Dimensions (L x W x D):
Rated Output Voltage
24Vdc
1
Single Phase
DRS-24V30W1NZ
0.11 kg (0.24 lb)
75 x 21 x 89.5 mm
(2.95 x 0.83 x 3.52 inch)
Rated Output Current
1.25A
N Z
NEC Class 2 Without DC OK
Relay Contact