Delta CliQ II DRP024V120W3B Series Technical Data Sheet

Delta CliQ II DRP024V120W3B Series Technical Data Sheet

Din rail power supply 24 v 120 w 3 phase

Advertisement

Quick Links

TECHNICAL DATASHEET
CliQ II DIN Rail Power Supply
24 V 120 W 3 Phase / DRP024V120W3B
General Description
The CliQ II 3-phase DIN rail power supply series offers output voltage of 24 V. These products are encased in rugged yet lightweight full
aluminium body that can withstand shock and vibration according to IEC 60068-2 standard. The series of 3-phase products can operate
over a wide temperature range of -25°C to +80°C. These products also feature universal AC input voltage range for 3-phase from 320 Vac
to 600 Vac or 2-phase from 360 Vac to 600 Vac, and the power will not de-rate throughout the entire range. Another great feature is the
conformal coating on the PCBA which allows selected models to be certified to ATEX and Class I, Div 2 for use in hazardous locations.
The design conforms to harmonic current emission IEC/EN 61000-3-2, Class A.
Model Information
CliQ II DIN Rail Power Supply
Model Number
DRP024V120W3B
Model Numbering
P
DR
DIN Rail
Power Supply
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
1
www.DeltaPSU.com (October 2021, Rev. 07)
Input Voltage Range
3 x 320-600 Vac (3-Phase) or
2 x 360-600 Vac (2-Phase)
24V
120W
Output Voltage
Output Power
Highlights & Features
Universal AC input voltage range
Power will not de-rate for the entire input voltage range
Power Boost of 150% for 5 seconds
Full corrosion resistant aluminium casing
Conforms to harmonic current IEC/EN 61000-3-2, Class A
Extreme low temperature cold start at -40°C
Conformal coating on PCBAs to protect against common
dust and chemical pollutants
Hazardous Locations approval to ATEX and Class I, Div 2
(DRP024V120W3BA)
Certified according to IEC/EN/UL 62368-1
Safety Standards
CB Certified for worldwide use
Model Number:
Unit Weight:
Dimensions (L x W x D):
Rated Output Voltage
24 Vdc
3
B
Three Phase
CliQ II Series
DRP024V120W3B
0.66 kg (1.46 lb)
121 x 50 x 117.3 mm
(4.76 x 1.97 x 4.62 inch)
Rated Output Current
5.00 A
A - Metal Case,
with Class I, Div 2
N - Metal Case,
without Class I, Div 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CliQ II DRP024V120W3B Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Delta CliQ II DRP024V120W3B Series

  • Page 1 TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Highlights & Features Universal AC input voltage range • • Power will not de-rate for the entire input voltage range Power Boost of 150% for 5 seconds •...
  • Page 2: Specifications

    TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Specifications Input Ratings / Characteristics Nominal Input Voltage 3 x 400-500 Vac Input Voltage Range 3 x 320-600 Vac (3-Phase) or 2 x 360-600 Vac (2-Phase) Nominal Input Frequency 50-60 Hz Input Frequency Range...
  • Page 3 TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Mechanical Case Cover / Chassis Aluminium Dimensions (L x W x D) 121 x 50 x 117.3 mm (4.76 x 1.97 x 4.62 inch) Unit Weight 0.66 kg (1.46 lb) Indicator...
  • Page 4: Reliability Data

    TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Protections Overvoltage 32 V ±10%, SELV Output, Hiccup Mode, Non-Latching (Auto-Recovery) Overload / Overcurrent > 150% of rated load current, Hiccup Mode, Non-Latching (Auto-Recovery) Over Temperature <...
  • Page 5 TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Safety Standards / Directives Electrical Equipment of Machines EN/BS EN 60204-1 (over voltage category III) Electrical Equipment for Use in Electrical Power Installations IEC/EN/BS EN 62477-1 / IEC 62103 Safety Entry Low Voltage SELV (IEC 60950-1) Electrical Safety...
  • Page 6 TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Emissions (CE & RE) Generic Standards: CISPR 32, EN/BS EN 55032, KN 32, CISPR 11, EN/BS EN 55011, FCC Title 47: Class B Component Power Supply for General Use EN/BS EN 61204-3 Immunity Generic Standards: EN/BS EN 55024, KN 35,...
  • Page 7: Block Diagram

    TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Block Diagram Device Description Input terminal block connector Output terminal block connector DC Voltage adjustment potentiometer DC OK control LED (Green) Universal mounting rail system All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
  • Page 8: Engineering Data

    TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Dimensions L x W x D: 121 x 50 x 117.3 mm (4.76 x 1.97 x 4.62 inch) Engineering Data Output Load De-rating VS Surrounding Air Temperature Note Power supply components may degrade, or be damaged, when the power supply is...
  • Page 9: Assembly And Installation

    TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Output Load De-rating VS Input Voltage No output power de-rating across the entire  input voltage range Assembly & Installation The power supply unit (PSU) can be mounted on 35 mm DIN rails in accordance with EN 60715. For Vertical Mounting, the device should be installed with input terminal block at the bottom.
  • Page 10: Safety Instructions

    TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Safety Instructions Vertical Mounting Horizontal Mounting   ALWAYS switch mains of input power OFF before connecting and disconnecting the input voltage to the unit. If mains are not turned •...
  • Page 11 TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Functions Graph illustrating the Start-up Time, Rise Time, and Hold-up Time  Start-up Time The time required for the output voltage to reach 90% of its final steady state set value, after the input voltage is applied. Rise Time The time required for the output voltage to change from 10% to 90% of its final steady state set value.
  • Page 12: Power Boost

    TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Power Boost Power Boost is the reserve power available constantly that allows reliable startup to support sudden and short spike of loads with high inrush current typically during turn on to remove the need of more expensive higher rated power supply unit.
  • Page 13 TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Overload & Overcurrent Protections (Auto-Recovery) Overvoltage Protection (Auto-Recovery) The power supply’s Overload (OLP) and Overcurrent (OCP) The power supply’s overvoltage circuit will be activated when its Protections will be activated when output current (I ) exceeds its internal feedback circuit fails.
  • Page 14: Operating Mode

    TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Operating Mode Redundant Operation  In order to ensure proper redundant operation for the power supply unit (PSU), the output voltage difference between the two units must be kept at 0.45~0.50 V for 24 V supplies.
  • Page 15  Delta's CliQ II can be connected in series to increase the output voltage as shown in figure above. Only power supply from the same product series, and with the same rated output current, can be used. The maximum load current should not exceed the smallest rated output current.
  • Page 16 TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24 V 120 W 3 Phase / DRP024V120W3B Fig. 7 DC Input Operation Connection Diagram DC Input Operation  Step 1. Use a battery or similar DC source. Step 2. Connect either connections of +pole and -pole to L1/L2/L3 as below. +pole to L1 and –pole to L2 •...
  • Page 17: Conformal Coating

    Attention Delta provides all information in the datasheets on an “AS IS” basis and does not offer any kind of warranty through the information for using the product. In the event of any discrepancy between the information in the catalog and datasheets, the datasheets shall prevail (please refer to www.DeltaPSU.com for the latest datasheets information).
  • Page 18 DIN Rail Power Supplies Click to view products by manufacturer: Delta Other Similar products are found below : PS-S6024 DVP01PU-S DVP06AD-S DVP06XA-S DVPDNET-SL DVPDT01-S DVPPS01 PS-6012 PS9Z-5R1G PS-C24024 DVP08ST11N DVPACAB530 DVPCOPM-SL DVPEN01-SL DVPPF01-S ADNB008-48-1PM-C ADNB017-24-1PM-C ADNB040-24- 1PM-C ADNB034-12-1PM-C SS14011524 PS-UPS40 PSC-6024 PSD-A60W12 96PS-A120WDIN PSD-A60W48 PSD-A40W12 PSD- A40W24 SMP21-L20-DC24V-5A PSD-A40W48 S8T-DCBU-02 PS-S4024 NTPS-24-1.3 ZI-20 PST-96024 S82YVSC4P PS-S4005 PS-...

This manual is also suitable for:

Cliq ii drp024v120w3ba

Table of Contents