Scan Skip Setting; 60-Meter (5 Mhz) Band (U.s. Version Only) - Yaesu FT-710 Operation Manual

• Scan Skip Setting

The "Frequency display" or "Name display" format
may be selected.
1. Press and hold the [V/M
The memory channel list will be displayed.
2. From the channel list, touch and select the
Memory Channel to be skipped during scan-
ning.
Alternately, the memory channel may be
selected by rotating the
knob.
3. Touch [SCAN MEMORY] area.
4. Rotate the
[STEP • MCH /
"SKIP", then press the [STEP • MCH /
knob.
● "X" lights up for channels for which "SKIP"
is set.
5. Touch [BACK] to save the new setting and re-
turn to normal operation.
To re-institute a channel into the scanning
loop, select "SCAN" in step 4 above.
] key.
[STEP • MCH / ]
knob to select
]
]
• 60-Meter (5 MHz) Band
(U.S. Version only)
Memory channels (U.S. version: "5-01" through
"5-10") are pre-programmed, at the factory, with
the permitted frequencies in the 5 MHz band, and
the USB or CW-U mode is automatically selected
on these channels.
These channels appear after the "last" PMS
channel ("M-P9U").
Channel Number
5-01
5-02
5-03
5-04
5-05
5-06
5-07
5-08
5-09
5-10
5-11
5-12
5-13
5-14
5-15
Frequency (U.S. Version)
5.332.000 MHz (USB)
5.348.000 MHz (USB)
5.358.500 MHz (USB)
5.373.000 MHz (USB)
5.405.000 MHz (USB)
5.332.000 MHz (CW-U)
5.348.000 MHz (CW-U)
5.358.500 MHz (CW-U)
5.373.000 MHz (CW-U)
5.405.000 MHz (CW-U)
5.332.000 MHz (DATA-U)
5.348.000 MHz (DATA-U)
5.358.500 MHz (DATA-U)
5.373.000 MHz (DATA-U)
5.405.000 MHz (DATA-U)
63