Rtty Operation; Psk Operation - Yaesu FT-710 Operation Manual

RTTY Operation

1. Before operating with RTTY, set the Menu items in the chart to the below.
Setting Menu
RADIO SETTING
→ MODE RTTY
→ POLARITY TX
RADIO SETTING
→ MODE RTTY
→ RPTT SELECT
RADIO SETTING
→ MODE RTTY
→ MARK FREQUENCY
RADIO SETTING
→ MODE RTTY
→ SHIFT FREQUENCY
2. Set the operating mode to RTTY-L.
Generally, amateur band stations operate RTTY in LSB.
Align the peak of the received signal with the mark frequency and shift frequency marker of the TFT
screen.

PSK Operation

1. For PSK operation, set the Menu items as indicated in the below chart.
Setting Menu
RADIO SETTING
→ MODE PSK/DATA
→ MODE SOURCE
RADIO SETTING
→ MODE PSK/DATA
→ RPTT SELECT
2. Set the operating mode to PSK.
Set the operation mode of the data communication software application on the PC to "DATA-U".
Align the peak of the received signal with the mark frequency and shift frequency marker of the TFT
screen.
58
Available Values (Bold is the default)
The shift direction of the RTTY transmit space frequency will be lower than
NOR
the mark frequency.
The shift direction of the RTTY transmit mark frequency will be lower than
REV
the space frequency.
Controls the RTTY transmit signal from the RTTY/DATA jack (pin 4) on the
DAKY
rear panel.
Controls the RTTY transmit signal from the USB virtual COM/RTS or DTR
RTS/DTR
ports.
1275Hz
Normally use at 2125 Hz.
2125Hz
170Hz
200Hz
Normally use at 170 Hz.
425Hz
850Hz
Available Values (Bold is the default)
MIC DATA is input from the MIC jack on the front panel.
USB DATA is input from the USB jack on the rear panel.
REAR DATA is input from the RTTY/DATA jack on the rear panel.
AUTO
DATA is input from the USB jack or RTTY/DATA jack on the rear panel.
Controls the DATA transmit signal from the RTTY/DATA jack (pin 4) on the
DAKY
rear panel.
Controls the DATA transmit signal from the USB virtual COM/RTS or DTR
RTS/DTR
ports.