Yaesu FT-710 Operation Manual page 91

CW MEMORY 3
Function: Selects the registration method for the
contest keyer "CW MEMORY 3".
Available Values: TEXT / MESSAGE
Default Setting: TEXT
Description:
TEXT: Use the optional FH-2 or the touch
panel to enter text (page 53).
MESSAGE: Use the keyer to register text to the
contest memory keyer (page 51).
CW MEMORY 4
Function: Selects the registration method for the
contest keyer "CW MEMORY 4".
Available Values: TEXT / MESSAGE
Default Setting: TEXT
Description:
TEXT: Use the optional FH-2 or the touch
panel to enter text (page 53).
MESSAGE: Use the keyer to register text to the
contest memory keyer (page 51).
CW MEMORY 5
Function: Selects the registration method for the
contest keyer "CW MEMORY 5".
Available Values: TEXT / MESSAGE
Default Setting: TEXT
Description:
TEXT: Use the optional FH-2 or the touch
panel to enter text (page 53).
MESSAGE: Use the keyer to register text to the
contest memory keyer (page 51).
REPEAT INTERVAL
Function: Sets the interval time between each re-
pition of the beacon message.
Available Values: 1 - 60 (sec)
Default Setting: 5 sec
Description: Set the interval for transmitting the
CW code registered in the contest
memory keyer as a beacon.
On the "CW MESSAGE MEMORY"
screen, press and hold the number
registered with the code to be sent.
The CW Morse code message will
be transmitted at the set intervals.
OPERATION SETTING
- GENERAL -
BEEP LEVEL
Function: Sets the beep volume level.
Available Values: 0 - 100
Default Setting: 20
Description: The higher the setting, the louder the
sound becomes.
RF/SQL VR
Function: Selects the operation mode of the RF/
SQL knob.
Available Values: RF / SQL / SQL(FM only)
Default Setting: RF
Description:
RF: Functions as the RF gain adjustment knob.
SQL: Functions as the Squelch level adjustment
knob.
SQL(FM only):
Functions as the squelch level adjustment
knob in FM, FM-N, DATA-FM and D-FM-
N modes, and as the RF gain adjustment
knob in other modes.
TUN/LIN PORT SELECT
Function: Selects the function of the TUNER/LIN-
EAR terminal.
Available Values: EXT-TUNER / LINERA / CAT-3
/ GP OUT
Default Setting: EXT-TUNER
Description: Select the antenna tuner to be used.
EXT-TUNER:
Select this item when using the external
antenna tuner (the optional FC-40, etc.).
LINEAR: Select this item when using a Linear
Amplifier.
CAT-3: Select this item when used as a CAT
terminal.
GP OUT: H/L signal is output by CAT command
"GP".
TUNER TYPE SELECT
Function: Internal and external antenna tuner
settings.
Available Values: INT / INT(FAST) / EXT / ATAS
Default Setting: INT
Description: Select the antenna tuner to be used.
INT: Select this item when using the internal
antenna tuner. (An external antenna tuner
cannot be used.)
INT(FAST):
Select this item when using the internal
antenna tuner. Tuning is performed at a
higher speed than normal, although ac-
curacy is slightly reduced. (An external
antenna tuner cannot be used.)
EXT: Select this item when using an external
antenna tuner (the
ATAS: Select this item when using the active
tuning antenna system ATAS-120A.
optional FC-40, etc.).
89