Fix; 3Dss; Multi - Yaesu FT-710 Operation Manual

• FIX

To use Fixed Mode, enter the start frequency of the
scope.
Display area start frequency
Marker* (Reception Frequency)
Marker* (Transmit Frequency)
Current display mode (FIX)
Sweep Speed
Scope Screen frequency span (display range).
The upper limit frequency of the display area.
*At factory shipment, marker display is ON.
FIX is displayed at the top of the scope screen.
Press and hold [FIX] while FIX is displayed, the fre-
quency input screen will be displayed, and the start
frequency can be entered:
Example:
To enter 7.000.000 MHz
[0] → [7] → [ENT] or [7] → [.] → [ENT]
To enter 7.030.000 MHz
[7] → [.] → [0] → [3] → [ENT]

• 3DSS

Switch between the 3DSS display and the waterfall
display.
The display will change each time it is touched:
3DSS type
Waterfall type

• MULTI

In addition to the scope display, the oscilloscope
and AF-FFT are also presented.
Touch again to return to the original screen.
Touch this area to set the attenuator.
Touch this area to set the level and sweep speed.
23