Table of Contents
Advertisement
About this document
1
About this document
1.1
Applicable documents
All available documents for the product è www.festo.com/pk.
Document
Instructions
Tab. 1 Applicable documents
Definition of term
The holding brake DACS and the cylinder with holding brake DFLC/DFLG are also referred to as
product in this manual.
1.2
Specified standards
Version
EN ISO 12100:2011-03
EN ISO 4414:2011-04
Tab. 2 Standards specified in the document
2
Safety
2.1
Safety instructions
–
Only use the product in original status without unauthorised modifications.
–
Only use the product if it is in perfect technical condition.
–
Observe labelling on the product.
–
Take into consideration the ambient conditions at the location of use.
–
Store the product in a cool, dry, UV-protected and corrosion-protected environment. Ensure that
storage times are kept to a minimum.
–
Protect the product during storage and operation from the following:
–
Corrosive coolant or other materials (e.g. ozone)
–
Oils, greases and grease-solvent vapours
–
Grinding dust, glowing chips or sparks
–
Prior to mounting, installation and maintenance work: Switch off compressed air supply and
secure it from being switched back on.
–
Observe tightening torques. Unless otherwise specified, the tolerance is ± 20 %.
The operating modes must guarantee that the residual risk is less than or equal to the accepted risk
(EN ISO 12100). The measures for risk reduction are to be taken in accordance with EN ISO 4414,
EN ISO 12100 and EN ISO 13849-1.
Festo — DACS-...-S; DFLC/DFLG-...-S — 2019-07
Product
Proximity sensor DADG-D-F8
EN ISO 13849-1:2016-06
EN ISO 13849-2:2012-10
Contents
Assembly
5
Advertisement
Table of Contents
