Table of Contents
Advertisement
EGSC-BS-KF
1
About this document
For all available product documentation è www.festo.com/pk
The mini slide EGSC-BS-KF is designated as product in these operating instructions.
Read the operating instructions carefully before starting all work on the product.
2
Safety
2.1
Safety Instructions
• Observe product labelling.
• Before working on the product, switch off the power supply and secure it against being switched on
again.
• Store the product in a cool, dry, UV-protected and corrosion-protected environment. Ensure storage
times are short.
• Protect the product during operation from damaging influences.
Damaging influences, for example, include grinding dust, glowing chips or sparks.
• Observe tightening torques. Unless otherwise specified, the tolerance is ± 20 %.
2.2
Use for intended purpose
The mini slide is intended to be used for positioning payloads in
combination with tools or as a drive when external guides are used.
The mini slide is approved for the "Slide Operation" mode è Fig. 1.
2.3
Training of specialized personnel
Only qualified personnel may perform installation, commissioning, maintenance and disassembly of the
product. The qualified personnel must be familiar with installation and operation of electrical control
systems.
3
Further information
Accessories è www.festo.com/catalogue.
4
Fig. 1
Festo – EGSC-BS-KF – 2016-12 English
Advertisement
Table of Contents
