Table of Contents
Advertisement
User Manual PROFINET / KNX
Document code: MN67818_ENG
Revision 1.000
Pagina 12 di 23
Industrial Electronic Devices
USE OF COMPOSITOR SW67818:
To configure the Converter, use the available software that runs with Windows called SW67818. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8; 32/64bit).
When launching the SW67818, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67818
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the PROFINET / KNX and is the answer not in the manual?
Questions and answers