Using A Cigarette Lighter Adapter; Programming Problems - Intermec PW40A Quick Start Manual

Bluetooth printer

Hide thumbs Also See for PW40A:

Table of Contents

Charging Problems

Using an AC Adapter

If the printer does not respond when it is connected to an AC

adapter, there could be a problem with the adapter or with the

wall outlet.

Note:If the battery is depleted, it may take 5- -10

minutes of charging before the printer can print a

self test.

Using a Cigarette Lighter Adapter

If the printer does not respond when it is connected to a ciga-

rette lighter adapter, it is possible that the fuse may be blown.

To check, remove the cigarette lighter adapter from all power

supplies and unscrew the cover over the pin. Pull out the fuse. If

the elements in the fuse appear broken, replace the fuse.

Refer to the Intermec Portable Printers Technical Reference Manu-

al (p/n: 978-018-001) Section 4 for more details OR call the

Intermec Technical Support 1-800-755-5505 for assistance.

PW40A Printer Quick Start Guide

Table of Contents