5. Outdoor Unit Alarm History Monitor
Recalls and displays the outdoor unit alarm history.
NOTE
This is for the outdoor unit only. Indoor unit alarms
•
cannot be recalled.
The indoor unit alarm history can be viewed on the
•
indoor unit remote controller or other controller.
<Operation procedure>
Press and hold the
(SET) button simultaneously for 4 seconds or
longer to engage outdoor unit alarm history mode.
During temperature monitoring,
illuminates.
Press the temperature setting
tons and select the item code for the alarm history.
The selected outdoor unit address, the item code,
and the alarm history (alarm data) are displayed.
The outdoor unit address is displayed as R.C.
XX – YY.
(R.C. XX = Outdoor unit system address)
YY = Outdoor unit sub-bus address (always "1" for
Mini ECO-i units)
Unit codes 01 – 08 are displayed. 01 indicates the
most recent alarm.
The alarm history displays the alarm code. (If no
alarms are present, then
To clear the alarm history, press the
(CANCEL) button. (The outdoor unit alarm history
will be cleared.)
To exit, press the
Return to normal display mode.
(CHECK) button and
(CHECK)
/
but-
is displayed.)
(CHECK) button.
6 - 11
Mini ECO-i System
Service Checker
6