How To Disable The Timer Operation - Sanyo MINI ECO-i SPW-CR365GXH56B Service Manual

11. Schedule Timer
(SHA-TM64AG(B))
STEP 4 Press the HOLIDAY button to enter the holiday.
The normal display returns.

How to Disable the Timer Operation

To halt programmed operation for one week or more, you can disable all timer programs.
Once the timer has been disabled, programmed operations are not run until the below procedure is performed.
NOTE
During installation, the remote controller may be set to disable the timer for individual groups. In this state, the
timer is disabled only for the selected group, therefore press the GROUP button to confirm which group is
selected.
Hold down the TIMER OFF button for more than
2 seconds
appears on the display. The timer is
disabled from the next scheduled program.
To turn the timer back ON, hold down the TIMER
OFF button for more than 2 seconds
goes out and the timer is enabled
from the next scheduled program.
7 - 169
Mini ECO-i System
Remote Control Functions
7