Sanyo MINI ECO-i SPW-CR365GXH56B Service Manual page 72

2. Outdoor Parallel I/O Interface
Mini ECO-i System
Remote Control Functions
(ACC-XSP4U1G(B))
Check that the power cable (AC 120/240V) has not been wired to the indoor/outdoor control
line terminal block. If power is accidentally applied here, the board fuse (F01) will blow in order
to protect the circuit board. After correcting the power cable connection, wire by connecting
the indoor/outdoor control line to CN05 1 to 3 (using the indoor/outdoor reservewire).
(Be sure to turn the power off before beginning work.)
7
7 - 12