Sanyo MINI ECO-i SPW-CR365GXH56B Service Manual page 110

5. System Controller
(SHA-KC64AG(B))
SW1
Main/sub selection switch
OFF: System controller operates as main controller.
ON: System controller operates as sub-controller.
ALL/ZONE mode selection switch
ALL mode:
All indoor units can be controlled by system controller ZONE
1, 2, 3, 4 mode:
Indoor units in one of zone 1, 2, 3, or 4 can be controlled by
system controller. All indoor units cannot be set.
ALL mode
ZONE 1 mode
ZONE 2 mode
ZONE 3 mode
ZONE 4 mode
Central control/Remote control mode selection switch.
OFF: Central control mode.
Individual setting by remote controller can be inhibited by
system controller.
ON: Remote control mode.
Setting by system controller is inhibited by other central
control equipments.
Central control Main/Sub selection switch
(OFF: Main, ON: Sub)
1 When AMY adaptor etc. is used with system controller,
set the switch to ON position.
2 When only one system controller is used, set the switch
to OFF position.
3 Except
only one system controller to OFF position others to ON
position.
ALL mode system controller to be OFF position.
(recommended)
(Central control) button operation switch
OFF:
ON :
*All switches are OFF position at shipment.
7
2 3 4 5
OFF OFF OFF
OFF OFF ON
ON OFF OFF ON
OFF ON ON
ON ON ON
1 , when multiple system controllers are used, set
(Central control) button operation is permitted.
button operation is inhibitted.
ON
OFF
7 - 50
Mini ECO-i System
Remote Control Functions
SW1
1 2 3 4 5 6 7 8
Fig. 5