To use WPA2-Personal, you need:
• an access point that supports WPA2, such as a Cisco 1230,
1231, or 1300 access point. For help, see the access point
system manual.
• a printer with EasyLAN Wireless Model AW02 running
firmware version 4.32 or later.
To use WPA2-Enterprise, you need:
• an authentication server. You can use a PC with the Funk
Odyssey RADIUS server software v1.1 or later. Or, you can
use a compatible authentication server.
• an authenticator that supports both WPA2 and 802.1x, such
as a Cisco 1230, 1231, or 1300 access point. For help, see the
access point system manual. The authenticator knows the IP
address and secret key of the authentication server and
translates EAP frames to Remote Authentication Dial-In User
Service (RADIUS) frames and vice versa.
• a printer with EasyLAN Wireless Model AW02 running
firmware version 4.32 or later.
EasyLAN Wireless Quick Start Guide
9