• If EasyLAN Wireless will use static WEP encryption, you
may need to know these parameters:
• Encryption Mode (WEP 128-bit or WEP 64-bit)
• Values for up to 4 WEP keys (entered in Hex values)
• WEP key (1, 2, 3, or 4)
• Authentication Type (Open System or Shared Key)
• If EasyLAN Wireless will use 802.1x security with TTLS or
PEAP, you may need to know these parameters:
• You do not need to ask about Encryption Mode because it
will be automatically set to Dynamic WEP.
• Inner authentication (PAP or MSCHAP_v2)
• User name and password
• Server common name 1 and server common name 2
• Will you use the current certificate, reinstall the default, or
specify the path and password for another certificate?
• If EasyLAN Wireless will use 802.1x security with LEAP, you
may need to know these parameters:
• You do not need to ask about Encryption Mode because it
will be automatically set to Dynamic WEP.
• Inner authentication (PAP or MSCHAP_v2)
• User name and password
• If EasyLAN Wireless will use WPA-Personal or
WPA2-Personal, you need to know the pre-shared key used
by the access point.
• If EasyLAN Wireless will use WPA-Enterprise or
WPA2-Enterprise, you may need to know these parameters:
• Inner authentication (PAP or MSCHAP_v2)
• User name and password
• Server common name 1 and server common name 2
• Will you use the current certificate, reinstall the default, or
specify the path and password for another certificate?
EasyLAN Wireless Quick Start Guide
13