Table of Contents
Advertisement
Collecting Information
By default, EasyLAN Wireless is in Infrastructure mode with the
SSID (network name) set to
security is disabled.
You need to collect the following information from your
network administrator:
• What type of wireless network are you using: ad-hoc or
infrastructure? For help, see the illustration on page 5.
• Will EasyLAN Wireless receive its TCP/IP address
automatically? Should you choose AUTO, DHCP, BOOTP,
or RARP?
• If you will manually enter the IP address, you also need to
know the subnet mask and default router.
• What is the SSID (network name) of the access point your
EasyLAN Wireless printer will communicate with?
• What type of security will EasyLAN Wireless use?
• Static WEP encryption
• 802.1x security with TTLS
• 802.1x security with LEAP
• 802.1x security with PEAP
• WPA-Personal
• WPA-Enterprise
• WPA2-Personal
• WPA2-Enterprise
• None
Note: If you choose None, you disable security.
Intermec recommends that you implement a security
solution to protect your data and network.
12
, DHCP is enabled, and
INTERMEC
EasyLAN Wireless Quick Start Guide
Advertisement
Table of Contents
