Programming Example; Cr1000X Program Example; Cr1000X Sdm-Ao4A Program Example - Campbell SDM-AO4A Product Manual

7.2

7.2.1 CR1000X Program Example

Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Equation for CR800 series and CR1000:
bit_rate = INT((k × 72)/625) × Resolution
Where:
k = the value entered in BitPeriod
Resolution = 8.68 microseconds
Equation for CR6, CR3000, CR1000X:
bit_rate = INT((k × 144)/625) × Resolution
Where:
k = the value entered in BitPeriod
Resolution = 4.34 µsec

Programming Example

The following program example is given to help the user understand the
general principles involved in the use of the SDM-AO4A with Campell
Scientific data loggers.
This example program is for weather stations with a data logger measuring
wind speed, wind direction, temperature, and relative humidity. Each parameter
is then scaled to 0 to 1000 mVDC, and output to a strip chart recorder through
the SDM-AO4A.
Although this program is for a CR1000X data logger, programming for other
CRBasic data loggers is similar.
CRBasic Exampe 7-1. CR1000X SDM-AO4A Program Example

'CR1000X SDM-AO4A Program Example

'Measure wind speed, wind direction, temperature, and humidity.
'Scale measurements to 0 to 1000 mV range and output to a strip chart recorder
'through the SDM-AO4A.
'Declare variables
'Example wind variables WS_ms and WD_0_360
Public WS_ms
Public WD_0_360
Public WD_0_540
'Example temperature and relative humidity variables
Public Temp_C
Public RH
'Example SDM-AO4A variables
Public AO4AOutput(4)
Public AO4AResponse
Alias AO4AOutput(1) = WSOut
Alias AO4AOutput(2) = WDOut
Alias AO4AOutput(3) = TempOut
Alias AO4AOutput(4) = RHOut
'Wiring
'Data logger to SDM-AO4A
'G- G
SDM-AO4A Four-Channel Analog Output
9