Synchronous Mode - Campbell SDM-AO4A Product Manual

SDM Transmission
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Vout 1 to Vout 4
FIGURE 6-1. Synchronous Mode
In sequential mode, the channels are set sequentially. The output signal can
take from 600 µsecs to 1 ms (worst case) to settle to 16-bit resolution with a
10V step change. The four outputs then update 1 ms apart.
SDM-AO4A Four-Channel Analog Output
5