Table of Contents
Advertisement
2.
Avoid operating the machine on wet grass. Remove any adjusting wrenches before switching the tool on.
3.
Always place your feet firmly when on slopes.
4.
Walk, never run.
5.
Mow transversely on slopes, never up and down.
6.
Be very careful when changing direction on slopes.
7.
Do not mow excessively steep slopes.
8.
Use the machine with extreme caution when using it in reverse or pulling it toward you.
9.
Turn off the cutting elements if the machine has to be tilted for transport through non-grassy areas and when
it has to be transported to or brought back from the location where it is to be used.
10. Never use the machine with defective guards or without safety devices in place, for example deflectors and/
or grass catchers.
11. Start the engine, drive carefully according to instructions and with your feet at a safe distance from the cutting
elements.
12. Do not put hands or feet near or under rotating parts. Never allow the ejection opening to get clogged.
13. Do not transport the machine while the power source is attached.
14. To stop the machine, turn off the battery and remove the battery connector. Make sure all moving parts have
completely stopped.
15. Stop the machine and remove the power-off device. Make sure all moving parts have completely stopped
• before leaving the machine,
• before cleaning any jams, or emptying the chute,
• before checking, cleaning or repairing the machine,
• after hitting an object inspect the machine to detect any damage and carry out repairs before restarting and
using it.
If the machine begins to vibrate abnormally, it is essential at once to:
• inspect the machine to see if it is damaged,
• check if any parts have worked loose, and tighten them if necessary,
• repair or replace any damaged parts.
2.1.4. MAINTENANCE AND STORAGE
1.
Make sure all nuts, bolts and screws are kept tight to be sure that the equipment is in good operating condition.
2.
Check for wear or damage to the grass catcher frequently.
3.
Replace worn or damaged parts so that the machine remains safe.
4.
Take all precautions necessary when it comes to multi-blade machines, since the rotation of one cutting element
can cause all the others to rotate.
5.
When adjusting the machine, avoid getting fingers caught between the moving blades and the fixed parts.
6.
Always allow the machine to cool down before storing.
7.
Pay attention during routine maintenance of the cutting elements, as they may still be moving, even if the power
source is cut off.
8.
Replace worn or damaged parts so that the machine remains safe. Only use certified spare parts and acces-
sories.
2.2. SAFETY MEASURES ASSOCIATED WITH CHARGER AND BATTERY USE
Important
Please refer to the tool battery instructions.PELLENC
2.3. PERSONAL PROTECTION EQUIPMENT
LAWN MOWER RASION 2 SMART
59_143879-B
Equipment
1
Safety helmet
2
Protective visor
Wear
--
--
7
Advertisement
Table of Contents
