ZKTeco ProFace X Installation Manual
  1. Manuals
  2. Brands
  3. ZKTeco Manuals
  4. IP Access Controllers
  5. ProFace X
  6. Installation manual

ZKTeco ProFace X Installation Manual

Hide thumbs Also See for ProFace X:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Installation Guide
ProFace X (DS)
Version: 1.0
Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the
actual product and the written information in this manual.

Advertisement

Table of Contents
loading

Related Manuals for ZKTeco ProFace X

Summary of Contents for ZKTeco ProFace X

  • Page 1 Installation Guide ProFace X (DS) Version: 1.0 Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.

  • Page 2: How To Install The Device

    How to Install the Device? Please refer to the following recommendations for installation. 10ft KEEP DISTANCE AVOID GLASS AVOID DIRECT KEEP EFFECTIVE REFRACTION SUNLIGHT DISTANCE AND EXPOSURE 0.3-2.5m Install on the wall ①Attach the mounting template sticker to the wall, and drill holes according to the mounting paper. ②Fix the backplate on the wall using wall mounting screws.
  • Page 3 Install on the barrier gate Please thread the wire through the bracket before installation. ①Drill a hole on the barrier gate, insert the bracket into the hole and fix it with a nut. ②Adjust the angle of the device. ① ②...
  • Page 4 Door Sensor, Exit Button & Alarm Connection Detector Power SmokeDetector Door Sensor ExitButton Alarm Alarm Power Wiegand Reader Connection Access controller INWD1 INWD0 +12V Wiegand reader...
  • Page 5 Barrier Connection RXD1 TXD1 485B 485A Barrier gate RS485 Connection +12V RXD1 TXD1 485- 485B 485+ 485A 485 reader Note: 485A and 485B can be connected to the Barrier gate or the 485 Reader, separately, but cannot be connected to the gate and reader at the same time.

  • Page 6: Power Connection

    Power Connection 12V3ADC Recommended power supply: 12V - 3A To share the power with other devices, use a power supply with higher current ratings. Ethernet Connection Connect the device and computer software over an Ethernet cable. An example is shown below: ZKBioSecurity Default IP address : 192.168.1.201...

  • Page 7: Printer Connection

    Printer Connection RXD1 TXD1 RS232 485B Printer 485A Download Center Scan the QR Code to download the User Manual, Installation Guide and Quick Start Guide. QR Code (Download Center)
  • Page 8 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright@2022 ZKTECO CO., LTD. All Rights Reserved.

Table of Contents