Output 4/5 Screen; Output 5/5 Screen - Panasonic AW-HE145WP Operating Instructions Manual

Camera menu items (continued)

Output 4/5 screen

O u t p u t 4/5
O S D O f f W i th R -Tally
O S D S t a t u s
T a l l y
T a l l y L E D Limi t
R
G
T a l l y B r i g htne ss
R e t u r n
OSD Off With R‑Tally [Off, On]
Off or on the function that turns off camera menu, status, and other
displays when red tally signals are received via commands or
contacts.
When the red tally signal releases, the camera menu display will
return.
OSD Status [Off, On]
Turn the status display during AWB and ABB off/on, or error display
when an error occurs.
Tally
[Enable, Disable]
[Disable] or [Enable] is set here for the function which turns on or
turns off the tally lamp using the tally control signal.
Tally LED Limit
Sets whether to limit the lighting of the tally lamp for each of the tally
control signal colors (R/G).
R [Limit, Unlimit]
G [Limit, Unlimit]
Limit Limit the lighting of the tally lamp.
Unlimit Light the tally lamp.
<NOTE>
• If [Limit] is selected for [Tally LED Limit], only the tally lamp of this
unit is limited. The tally status display on external devices (the AW-
RP150, AW-RP60 controller, etc.) remains enabled.
Tally Brightness [Low, Mid, High]
Adjust the brightness of the tally LED.
Return
Return to the previous menu level.

Output 5/5 screen

O ff
O ff
Enab le
Unlim it
Unlim it
L ow
Status Lamp
[Enable, Disable]
[Disable] or [Enable] is set here for the status display lamp.
When you want the status display lamp to stay off while this unit is in
operation, set to [Disable].
<NOTE>
• Even when set to [Disable], the status display lamp may light
up when this unit is starting up, updating firmware, or trouble is
occurring.
External Output
Select the signal type output from the External Output signal lines
(Output1, Output2) of the RS‑422 connector. (→ page 16)
Output1 [Off, R‑Tally, G‑Tally]
Output2 [Off, R‑Tally, G‑Tally]
Off
R-Tally
G-Tally
Return
Return to the previous menu level.
59
O u t p u t 5 / 5
S t a t u s L a m p
E x t e r n a l O u t p u t
O u t p u t 1
O u t p u t 2
R e t u r n
Signal is not output.
The reception status of the red tally signal is output.
The reception status of the green tally signal is output.
E n a b l e
O f f
O f f