Preset 2/2 Screen - Panasonic AW-HE145WP Operating Instructions Manual

Camera menu items (continued)

Preset 2/2 screen

P r e s e t 2 /2
P r e s e t T hum bnai l Upda te
P r e s e t N ame
P r e s e t I ris
P r e s e t Z oom Mod e
F r e e z e D uri ng P reset
R e t u r n
Preset Thumbnail Update [Off, On]
Turn off/on the function for registering the still image (thumbnail) for
the images being output when a preset memory is registered.
When set to [On], the still image (thumbnail) for the images being
output is registered when registering a preset memory.
When set to [Off], the still image (thumbnail) for the images being
output is not registered when registering a preset memory, but rather
the still image (thumbnail) previously registered is maintained.
<NOTE>
• When the IP for [OSD Mix] is [On], the menu screen is included in
the thumbnails.
• When uploading Camera(ALL) or Camera(SYSTEM) on the web
screen or other access, the still image (thumbnail) that has been
registered in preset memory will be erased. (→ page 132)
Preset Name [Reset, Hold]
When registering a preset memory, set whether to reset the
previously registered preset name or keep it.
Reset When registering a preset memory, reset the
previously registered preset name.
The preset name after resetting will be [Preset
( is a 3 digit preset number: 001 to 100)
***
Hold When registering a preset memory, keep the
previously registered preset name.
<NOTE>
• The factory default setting for the preset name is [Preset
a 3 digit preset number: 001 to 100)
• The registration of preset names can be done in the web browser.
0 to 9, A to Z, a to z, _ , and space
Preset Iris [Off, On]
When the preset memory is played back, set whether the
reproduction of the values in the various menus related to Iris is off/
on.
When set to [On], the values set in the various menus below are
On
reproduced when preset memory is played back.
Reset
- Picture Level
Off
- Iris Mode
Mode A
- Auto Iris Speed
Off
- Auto Iris Window
- Auto Iris Close Limit
<NOTE>
• Its setting takes effect when [Mode A] or [Mode B] has been
selected as the [Preset Scope] setting.
Preset Zoom Mode [Mode A, Mode B]
Select the zoom operation for when preset memory is recalled.
Mode A
Mode B
Freeze During Preset [Off, On]
Turn the function for freezing images during preset playback off/on.
When this is set to [On], preset playback is performed with a still of
the image immediately preceding the start of preset playback being
output. The image freeze is released when preset playback is finished.
Return
Return to the previous menu level.
].
***
]. ( is
*** ***
62
Perform the zoom operation in line with the pan/tilt
operation.
Perform the zoom operation quicker than the pan/tilt
operation.