Auto Iris Window Normal1; Auto Iris Close Limit Normal - Panasonic AW-HE145WP Operating Instructions Manual

Web screen configurations (continued)
Image adjust screen [Image adjust]
„ „
Adjust the image quality.
The settings in this screen (with the exception of [Scene] and [Matrix])
are applied immediately. After selecting the settings for [Scene] and
[Matrix], you need to press the [Set] button to execute.
Scene [Scene1, Scene2, Scene3, Scene4]
Switch the shooting mode depending on the shooting environment.
Select a shooting mode based on the shooting conditions or
preference.
Select a shooting mode from the pull-down menu, and click the [Set]
button to switch to the selected mode.
Scene1 Modes that allow you to adjust detailed settings manually
Scene2 for various shooting conditions and preferences.
Scene3
Scene4
Factory settings: Scene1
Camera control/Setup Menu button
You can display the camera control screen by clicking the [Camera
control] button.
You can control the camera while adjusting the image quality.
z Brightness
„
Picture Level [–50 to +50]
This menu item is selected to set the target picture level for automatic
exposure compensation.
Its setting takes effect when [Auto] or [ELC] has been selected as
the setting for any of the following automatic exposure compensation
functions.
• When [Iris Mode] is set to [Auto]
• When [Shutter Mode] is set to [ELC]
• When [Gain] is set to [Auto]
Factory settings: 0
Iris Mode [Manual, Auto]
This menu item is used to select whether the iris is to be adjusted
automatically or manually.
Manual The iris is adjusted manually.
Auto Auto exposure compensation is performed so that
the target level which was set using [Picture Level] is
reached.
Factory settings: Auto
Auto Iris Speed [Slow, Normal, Fast]
Set the control speed of the auto iris function.
Slow Control the iris at a slow speed.
Normal Control the iris at a normal speed.
Fast Control the iris at a fast speed.
Factory settings: Normal
Auto Iris Window [Normal1, Normal2, Center]
Select the detection window for the auto iris.
Normal1 Window towards the center of the screen.
Normal2 Window towards the bottom of the screen.
Center Spotted window in the center of the screen.
Factory settings: Normal1
Auto Iris Close Limit [Normal, F8, F7, F5.6]
Sets the limit value for the CLOSE side in auto iris.
Normal Moves up to the normal position (the vicinity of F9).
F8 The limit is in the vicinity of F8.
F7 The limit is in the vicinity of F7.
F5.6 The limit is in the vicinity of F5.6.
Factory settings: Normal
100