Table of Contents
Advertisement
Camera menu items (continued)
Picture 7/7 screen
P i c t ure 7/7
W h i t e C l ip
W h i t e C lip Lev el
D N R
R e t u r n
White Clip [Off, On]
Turn the white clip function off/on.
This is only enabled when [Gamma Mode] is set to other than [HLG].
White Clip Level [90% to 109%]
Set the white clip level.
This is only enabled when [Gamma Mode] is set to other than [HLG].
This is only enabled when [White Clip] is set to [On].
<NOTE>
• When [Knee Mode] is set to [Auto] and the value of [White Clip
Level] is changed, the knee value will also change.
DNR [Off, Low, High]
Set the digital noise reduction level for outputting bright, clear images
without noise, even at night and low-light conditions.
When [Low] or [High] is selected, noise can be eliminated.
However, image lag may increase.
Return
Return to the previous menu level.
Matrix 1/5 screen
On
109%
Low
Matrix Type [Normal, EBU, NTSC, User]
Select the type of color matrix.
Normal
EBU
NTSC
User
Adaptive Matrix [Off, On]
Set Off/On the function that suppresses the linear matrix to suit the
shooting conditions.
Return
Return to the previous menu level.
51
M a t r i x 1 / 5
M a t r i x T y p e
A d a p t i v e M a t r i x
R e t u r n
This item is used to load the preset color matrix data and
compensate for the saturation and color phase.
On the [Matrix 2/5] screen, the [Linear Matrix] value can be
adjusted by the user.
On the [Matrix 3/5] screen, [Matrix 4/5] screen or [Matrix
5/5] screen, the [Color Correction] value can be adjusted
by the user.
N o r m a l
O f f
Advertisement
Chapters
Table of Contents
