Features - Panasonic AW-HE145WP Operating Instructions Manual

Features

Multi‑format support
„ „
• You can switch between the following formats via the camera
menus or a web browser.
[HD format]
1080/59.94p, 1080/50p, 1080/29.97p
1080/25p , 1080/25PsF, 1080/23.98p
1
*
1080/23.98p 1 , 1080/23.98PsF, 1080/59.94i, 1080/50i,
*
720/59.94p, 720/50p
*
1
Native output
* 2
OVER 59.94i output (your monitor may recognize the signal as
59.94i).
1-type MOS sensor and high-performance 20x
„ „
zoom lens featured
• A newly developed 1-type MOS sensor and DSP (digital signal
processor) are incorporated. High-quality pictures are obtained by
video processing in many different kinds of ways.
• In addition to its optical 20x zoom lens, the unit comes with a
10x digital zoom to achieve high-quality images that overflow
with ambiance. Zoom up to 32x is possible while maintaining the
picture quality with the use of iZoom.
• A dynamic range stretcher (DRS) function that compensates for
overexposure and loss of dark detail and a digital noise reduction
(DNR) function for minimizing image lag even in dark locations
and shooting scenes clearly are incorporated to reproduce clean
and clear images in a wide range of applications.
Easy operation of unit enabled by its
„ „
integration with a high‑performance pan‑tilt
head unit
• Operations at the high speed of 60°/s
• Wide rotational angles with a panning range of ±175° and a tilting
range from –30° to 210°
• Quiet operation with noise levels of NC35
• Storage of up to 100 positions in the preset memory
(The number of preset memories that can be used varies from one
controller to another.)
Built‑in night mode
„ „
• The unit supports infrared shooting.
By exposing subjects to infrared rays, shooting under ordinarily
difficult low-light conditions is possible.
(Image output will be in black and white.)
• The iris will be fixed at open.
IP image output functions
„ „
• The unit is equipped with image compression and IP transmission
LSI capabilities. Output in 2K quality at up to 60 fps.
• Operation with IP control allows for a wide range of applications,
such as controlling the camera from remote locations.
High degree of compatibility with Panasonic's
„ „
currently available controllers, enabling a
flexible system to be put together
• A maximum of five units can be operated by serial control from
one of Panasonic's currently available controllers (AW-RP150,
AW-RP60).
The unit can also be used together with the cameras and pan-tilt
head unit systems currently available from Panasonic Connect
Co., Ltd. so that an existing system can be used to advantage to
put together a system that is even more flexible.
1 , 1080/29.97PsF,
*
, 1080/24p ,
2 1
* *
10
<NOTE>
• It may be necessary to upgrade the version of the controllers
in order to support the unit. For details on upgrading, visit the
support page on the following website.
https://pro-av.panasonic.net/
The maximum distances between the units and controller is
1000 meters (3280 ft). (when serial control is exercised)
Use of an external device or some other means must be
provided separately in order to extend the video signal
connections.
Easy construction of systems thanks to
„ „
integrated design used for pan‑tilt head,
camera and lens
• By integrating the camera, lens and pan-tilt head into a single unit,
it is now easier to construct systems.
Use of easy‑to‑operate wireless remote control
„ „
(optional accessory) is possible
• A wireless remote control capable of operating up to four units can
be used.
It can easily be used to set the various functions or switch
between them while viewing the menu screens.
Flexible camera layout enabled by simple
„ „
connection and installation
• This unit features excellent connectivity and installability thanks
to the IP control; a lightweight main unit, and the turn-lock
mechanism, which enables the user to install it on his or her own
(only when used indoors).
<NOTE>
• Bear in mind that this unit is designed to be used indoors only:
It cannot be used outdoors.
While including a larger lens and pan/
„ „
tilt mechanism, the unit still has the same
installation footprint as previous models.
• The unit maintains the compact installation footprint of previous
models.
Easy connections and settings courtesy of IP
„ „
control
• Up to two hundred units can be operated by IP connection from a
Panasonic controller (AW-RP150, AW-RP60).
(The maximum length of the LAN cables is 100 meters (328 ft).)
• Network connection with AW-RP150 or AW-RP60 requires setup
of an initial account. (→ page 27)
When an initial account is not set up, AW-RP150 or AW-RP60 can
detect but cannot control this unit.
PoE++ eliminates need for camera power
* 3
„ „
configurations
• Configurations for camera's power supply are not necessary when
the unit is connected to a network device that supports the PoE++
standard (IEEE 802.3bt compliant)
Software authentication (LLDP) is also supported, but it may be
necessary to make settings on the network device (IEEE P802.3bt
compliant) 4 .
*
<NOTE>
• If the external DC power supply and a PoE++ power supply are
connected simultaneously, the external DC power supply will have
priority. If the external DC power supply is disconnected while both
power supplies are connected, the unit will restart automatically,
and the image will be interrupted.
• Use a Category 5e cable or higher when using a PoE++ power
supply. The maximum length of the cable between the power
supply unit and the unit is 100 meters (328 ft). Using a cable that
is lower than Category 5e may result in reduced power supply
capabilities.
* 3
Power over Ethernet Plus Plus. Referred to as "PoE++" in this
manual.
* 4
For details on PoE++ power supply devices for which operation
has been verified, consult your local dealer.
.
4
*