Connecting To A Bluetooth Headset - Intermec CK60 User Manual

Chapter 5 — Network Support
82

Connecting to a Bluetooth Headset

If several Bluetooth audio devices are found, you can only connect to one.
Before connecting to that audio device, you must set it as the default.
To connect to an audio device
1 Double-tap a device for its pop-up menu.
2 Select to check Set as default if it is not already checked.
On successful device activation, the device icon changes to include a red
check mark. You can set another device as the default without having to
clear the red check mark on the original.
Select Refresh to retrieve missing information from a device. Select
Delete to remove a device from the list.
3 If the activated device has a "hands-free" profile, press a button on the
device to establish an audio connection between the CK60 and the
activated device. See the user manual for the Bluetooth device for
information on what button to press.
4 To establish an audio connection to the activated device with either a
"headset" or "hands-free" profile, double-tap the audio device, then
select Connect from the pop-up menu.
A check mark is added to this option in the pop-up menu. To disconnect
from the audio device, repeat this step to clear the check mark.
5 When connection is established, the "connected/disconnected" status
changes to that of a "connected" status and the Audio Device Settings
are enabled to adjust settings of the connected Bluetooth audio device.
Tap the Volume slider bar
to adjust the volume
CK60 Mobile Computer with Windows CE User's Manual
Tap the Microphone slider bar
to adjust the amplification