Verifying The Dock Power Cable Polarity; Performing The Final Connections - Intermec CK61 Installation Instructions Manual

Verifying the Dock Power Cable Polarity

Use this illustration to verify that you have
installed your vehicle dock power cables correctly.
Below are the pin descriptions for the notched DC power
connector on the dock power cable. Use a volt meter to verify
whether +12 volts is on pin 2 before you make the final cable
connection.
Pin 3, ground
Pin 2, 12 volts
Vehicle Dock Power Cable 3-Pin Male Power Connector

Performing the Final Connections

1 Connect the keyed rectangular connector end of the dock
power cable P/N 236-105-001 to the previously installed gray
battery cable.
2 Attach the circular notched DC power connector of the dock
power cable to the installed vehicle dock.
12
Pin 1, chassis ground (optional)
Vehicle Dock Kit Installation Instructions