Installation Guidelines; Vehicle Electrical Considerations - Intermec CK61 Installation Instructions Manual

Installation Guidelines

These instructions detail tasks for various installation options.
Your tasks include:
• Route and install the gray battery power cable to the vehicle
battery terminals
• Install an in-line fuse holder
• Install the mounting hardware and vehicle dock
• Connect the black dock power cable to the vehicle dock and
the battery power cable. Depending on your installation, this
may simply involve connecting the keyed connector, or it may
involve cutting the connector off and wiring directly to the
fuse block.
Installation Tools Required
• Wire crimping and stripping tool
• An electric drill, #26 drill bit
• Common hand tools set of standard wrenches, flat blade
screwdriver, Phillips screwdriver, wire cutter, utility knife, and
small punch.

Vehicle Electrical Considerations

Your vehicle's electrical system must be in good working
condition.
Power Cables for Vehicle Battery Kit P/N 203-344-001
Description
Dock power cable (black)
Battery cable (gray)
Power Cables for Vehicle Battery Kit P/N 203-344-002
Description
Dock power cable (black)
Battery cable (gray)
Vehicle Dock Kit Installation Instructions
Part Number
236-105-001
236-106-005
Part Number
206-875-009
226-325-002
7