Jump-Starting Your Vehicle - Intermec CK61 Installation Instructions Manual

To modify the black dock cable to connect into a vehicle fuse block
• Switch to using the fuse block cable P/N 226-109-003, or
Cut off the white connector from the end of the dock power
cable and wire it directly to the fuse block.
Note the difference in polarity between these two
cables.
Wiring for Fuse Block Cable and Dock Power Cable
Cable
Dock power (black) P/N 236-105-001
Fuse block (gray) P/N 226-109-003

Jump-Starting Your Vehicle

Failure to follow these instructions may result in
damage to your mobile computer equipment.
Always disconnect the power cables from the dock and printer
before attempting to jump-start your vehicle.
Vehicle Dock Kit Installation Instructions
White Wire Black Wire
Negative Positive
Positive Negative
15