Table of Contents
Advertisement
2.2.3
BMC Network Configuration
BMC network configuration lists LAN configuration such as Address source, IP
address, and Subnet mask. The default IP and Subnet mask can be used for first
time BMC setting.
There are three types of Address source.
–
Unspecified
Use default IP setting.
–
Static
Use custom assigned IP setting, set Station IP address and Subnet mask
after change Configuration Address to Static.
–
Dynamic-Obtained by BMC
Dynamically get IP source from your server board.
Note!
LAN2 is available in specific models.
MAC rewrite is only applied in Linux command.
2.3
LAN Setting
If the LAN of the client computer wants to connect to the ASMB server board LAN
then the same client and server setting is required to be in the same segment of the
IP address of ASMB-BMC on the host.
7
ASMB-BMC User Manual
Advertisement
Table of Contents
