Hw Environment; Bios Setting - Advantech ASMB-BMC User Manual

2.1

HW environment

To setup ASMB the server board hardware and dedicated LAN for BMC, please refer
to ASMB server board user manual.
ASMB-BMC module should be well placed on IPMI1 (2 x 5 pin header), once ASMB-
BMC is initialized, an LED indicator will be blinking.
2.2

BIOS Setting

Press <Del> or <F2> at bootup to enter AMI BIOS Setup Utility, the Main Menu will
appear on the screen. Use arrow keys to select among the items and press <Enter>
to accept or enter the sub-menu.
Server Mgmt is used to modify ASMB-BMC setting.
 BMC Support
To "Enable or Disable" BMC support. Set BMC support [Disabled] if you don't
need BMC function. Once it is disabled, BIOS will not check ASMB-BMC initial
status when starting.
 Wait for BMC
To "Enable or Disable" wait For BMC. Once it is disabled, BIOS will initial with-
out waiting for ASMB-BMC ready.
Note! BMC function will not be active if Wait for BMC is disabled.
ASMB-BMC User Manual 4