Chapter 5 — Network Support
802.11b/g Communications
112
Note: The Network Selection APIs change the network adapter
configuration programmatically. See
the APIs.
To configure the radio
1 Tap Start > Settings > Network and Dial-up Connections.
2 Double-tap the applicable radio connection icon to access and configure
its properties.
IP Address
These two screens are for the Samsung radio using the SWLD26C1 connection icon
shown on the left. Should your 751G have the Wistron radio installed, you can expect to
see a BCMCF1 connection icon.
To configure the 802.11b/g network adapter power through Intermec Settings
1 Select Start > Settings > Control Panel, then double-tap the Intermec
Settings icon.
2 Tap (+) to expand Communications > 802.11 Radio.
3 Configure your radio settings, then tap File > Save.
"Networking APIs" on page 78
Name Servers
751G Color Mobile Computer User's Manual
for