Intermec 751G User Manual page 72

Chapter 3 — Configuring the Computer
Required? Yes
copyfile_list_section destination_filename,[source_filename] The source_filename parameter is optional if it is the same
copyfile_list_section flags
Flag
COPYFLG_WARN_IF_SKIP
COPYFLG_NOSKIP
COPYFLG_NO_OVERWRITE
COPYFLG_REPLACEONLY
CE_COPYFLG_NO_DATE_DIALOG 0x20000000
CE_COPYFLG_NODATECHECK
CE_COPYFLG_SHARED
Required? No
add_registry_section registry_root_string String that specifies the registry root location. The following list shows the
add_registry_section value_name
add_registry_section flags
58
[CopyFiles]
This section, under the [DefaultInstall] section, describes the default files
to copy to the target device. Within the [DefaultInstall] section, files were
listed that must be defined elsewhere in the .inf file. This section identifies
that mapping and may contain flags.
Value
0x00000001
0x00000002
0x00000010
0x00000400
0x40000000
0x80000000
Example
[DefaultInstall.SH3]
CopyFiles = Files.Common, Files.SH3
[DefaultInstall.MIPS]
CopyFiles = Files.Common, Files.MIPS
[AddReg]
This section, under the [DefaultInstall] section, is optional and describes
the keys and values the .cab file adds to the device registry. Within the
[DefaultInstall] section, a reference may be made to this section, such as
"AddReg=RegSettings.All". This section defines options for that setting.
values supported by Windows CE.
• HKCR Same as HKEY_CLASSES_ROOT
• HKCU Same as HKEY_CURRENT_USER
• HKLM Same as HKEY_LOCAL_MACHINE
Registry value name. If empty, the "default" registry value name is used.
Numeric value that specifies information about the registry key. The
following table shows the values that are supported by Window CE.
as destination_filename.
The numeric value that specifies an action to be done
while copying files. The following table shows values
supported by Windows CE.
Description
Warn user if skipping a file is attempted after error.
Do not allow a user to skip copying a file.
Do not overwrite files in destination directory.
Copy the source file to the destination directory only if the
file is already in the destination directory.
Do not copy files if the target file is newer.
Ignore date while overwriting the target file.
Create a reference when a shared .dll is counted.
751G Color Mobile Computer User's Manual