Renewdhcp(); Resetradiotosystemsave(); Startscanlist() - Intermec 751G User Manual

751G Color Mobile Computer User's Manual

RenewDHCP()

Call this to force a DHCP renewal on the current network adapter.
Syntax
UINT RenewDHCP( );
Parameters None.
Return Values ERROR_SUCCESS when successful.
Remarks You should not have to call this function on Microsoft Windows CE 4.2
.NET and later devices.
Definitions
#ifdef DYNAMIC_LOADING
typedef UINT (*PFN_RenewDHCP)();
#else
UINT RenewDHCP();
#endif

ResetRadioToSystemSave()

Call this function to force the radio to reset to the last desired active profile.
Syntax
UINT ResetRadioToSystemSave( );
Parameters None.
Return Values ERROR_SUCCESS when successful.
Remarks None.
Definitions
#ifdef DYNAMIC_LOADING
typedef UINT (*PFN_ResetRadioToSystemSave)();
#else
UINT ResetRadioToSystemSave();
#endif

StartScanList()

If a scan list is configured on the system, this causes the API to begin the
process of scanning for an available network. This call can take quite a
while to process (depending upon the length of the scan list and how long it
takes to find a valid network), you may wish to call it from a separate thread.
Syntax
UINT StartScanList( );
Parameters None.
Return Values ERROR_SUCCESS when successful.
Remarks Call this function to start the scan list functionality of the system.
Definitions
#ifdef DYNAMIC_LOADING
typedef UINT (*PFN_StartScanList)();
#else
UINT StartScanList();
#endif
Chapter 3 — Configuring the Computer
95