Helper Functions; Configureprofile(); Enablesupplogging() - Intermec 751G User Manual

Chapter 3 — Configuring the Computer

Helper Functions

Syntax
UINT EnableSuppLogging( ULONG );
Parameters NDIS_SUPP_LOGGING_ON
NDIS_SUPP_LOGGING_OFF
Return Values ERROR_SUCCESS when successful.
Remarks None.
Definitions
#ifdef DYNAMIC_LOADING
typedef UINT (*PFN_EnableSuppLogging)(ULONG);
#else
UINT EnableSuppLogging(ULONG);
#endif
92

ConfigureProfile()

If using the Intermec 802.11b/g Profile Management system, you can
program the API to configure the radio to a specific profile by passing the
profile name.
Syntax
UINT ConfigureProfile( TCHAR * );
Parameters Pointer to a character array that contains the profile name. This should be
null-terminated.
Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the
query failed, or ERR_CONNECT_FAILED if a connection with the
radio failed.
Remarks Call this function with a pointer to a null-terminated TCHAR array that
contains the name of the profile you wish to configure. This function
reads profile data from the profile manager, sets that profile as the default
active profile, and configures the radio appropriately. If needed, the
supplicant and any other related services are automatically started and
stopped.
Definitions
#ifdef DYNAMIC_LOADING
typedef UINT (*PFN_ConfigureProfile)(TCHAR *);
#else
UINT ConfigureProfile(TCHAR *);
#endif

EnableSuppLogging()

Call this function to set the desired supplicant logging mode.
Supplicant Logging Enabled
Supplicant Logging Disabled
751G Color Mobile Computer User's Manual