Intense M 2022 Series Manual page 7

A
C
12
B
S T E P 2
INSTALL
HANDLEBARS
Using the 4mm Allen key remove the four bolts from
the two handlebar clamps of the stem
handlebars in place. Use the guidelines printed on
the handlebars to help position them centrally and
evenly. Check that the brake hoses and shifter cable
have a nice flow and are not kinked or twisted in any
way.
Replace the stem handlebar clamps and reinsert the
bolts (B), first by hand and then with the 4mm Allen
key. Gradually tighten the bolts, making sure that the
bars are still positioned correctly and that the space
between the faceplate and the main body of the stem
is even both above and below the bar.
When tightening the bolts follow this pattern
ensure even clamping: top left, bottom right, bottom
left, top right. Finish off using the torque wrench to
5Nm.
(A) and put the
(C) to
13