Intense M 2022 Series Manual page 10

G
H
J
18
I
K
S T E P 4 C O N T I N U E D . . .
Once everything is lined up and in position, reinsert
the axle from the non-drive side of the bike
tighten using a 5mm Allen key in a counterclockwise
direction (H). Torque to 11Nm (I). On the non drive-
side, tighten and torque the cone spacer bolt to 14Nm
(J). This will effectively lock the axle into position.
You can now take the lock off the rear derailleur. To
do this, gently push the derailleur cage forward a
little (K) and the cage lock will automatically release.
Slowly let the derailleur arm move backwards into
position.
(G) and
19