Intense M 2022 Series Manual page 12

E
F
22
S T E P 5 C O N T I N U E D . . .
EXPERT BUILD (DVO)
Install the front wheel into the dropouts and insert
the axle through the dropouts and hub. With a 6mm
Allen key, and applying some inward pressure, tighten
the axle in a clockwise direction. Torque to 7Nm.
Compress the fork a couple of times to ensure that the
lower leg has settled into its natural alignment. Then
with your 4mm Allen key torque the two pinch bolts
to 7Nm.
PRO BUILD (ÖHLINS)
With a 5mm Allen key, and applying some inward
pressure, tighten the axle (E) in a clockwise direction.
Torque to 7Nm. Compress the fork a couple of times
to ensure that the lower leg has settled into its natural
alignment. Then with your 5mm Allen key tighten and
torque the two lower leg pinch bolts (F) to 7Nm.
23