AAMP Global PAC SR-GM14H Manual page 40

PRECAUTIONS
Installation of this product requires technical skill
and experience. It is recommended to have it
professionally installed by an authorized Stinger /
Phoenix Gold / PAC / Best Kits Dealer.
Read entire instructions thoroughly before starting.
Disconnect the vehicle's negative battery cable
before making any wire connections.
Protect all vehicle surfaces with tape or plastic
Do not install components in any location that will
hinder vehicle operation, such as steering wheel,
gearshift, air bags, hazard switch.
All wiring should be secured away from sharp
edges and moving parts.
Visit StingerElectronics.com for
User Guide | Install Guides | Updates | Tech Tips
TECHNICAL SUPPORT:
727-592-5991
Mon-Fri 9AM-8PM EST
Sat 9AM-7PM EST
support@aampglobal.com
Stinger is a Power Brand of AAMP Global
15500 Lightwave Drive, Suite 202
Clearwater, Florida 33760
CUSTOMER SOLUTIONS:
800-477-2267
Mon-Fri 9AM-8PM EST
customersolutions@aampglobal.com
AGREEMENT: End user agrees to use this product in
compliance with the instructions and terms of use and
with all State and Federal laws. STINGER provides
instructions and safety warnings with respect to this
product and disclaims all liability for any use not in
conjunction with those instructions or other misuse of
its product. If you do not agree, please discontinue use
and contact STINGER. This product is intended for off-
road use and passenger use only.
MODEL NUMBER: UN1810
INSTALLATION GUIDE
CONTENTS
Contents.........................................................3
Parts List........................................................4
Hardware Guide.............................................5
Pre-Assembly...................................................6
Display Assembly.............................................7
Mounting Options..........................................7
Double DIN Dash Kit Mounting.......................8
Double DIN Sub-Dash Kit Mounting...............10
Double DIN Factory Bracket Mounting............12
Single DIN Dash Kit Mounting........................14
Final Assembly...............................................16
Wiring & Connections....................................17
Dimensions....................................................21
Troubleshooting..............................................22
Upgrades/Options.........................................23
®
®