AAMP Global PAC SR-GM14H Manual page 13

SR-GM14H
Section Five: Radio Module Preparation
Part One: Radio Module Side Brackets
Cut
90° Bend
Step 1
From the HEIGH10 hardware,
mark the two metal brackets as
shown above. Make a 90° bend
at the solid line and cut along the
dotted line.
Bracket
Step 4
Align the other 90° bracket to
the right side as shown. Bracket,
then spacer and attach with two
M5x10 screws in the locations
shown.
®
Pacific Accessory Corporation
Save the cut off end pieces; they
will be used as spacers. From the
HEIGH10 hardware, four M5 x 10
screws will be used to attach the
Spacer
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
Stinger HEIGH10 Radio Replacement Kit
for select 2014-2019 Silverado/Sierra Truck
Step 2
brackets.
From the HEIGH10 box, connect
the LVDS (Blue USB) and 10
pin display cables to the Radio
®
Spacer
Step 3
Align one of the 90° side brackets
to the left side as shown. Bracket,
then spacer and attach with two
M5x10 screws in the locations
shown.
Step 5
Module.
Rev: V1
Date: 030121
Bracket
Page 13