AAMP Global PAC SR-GM14H Manual page 10

SR-GM14H
Section 2: In-Vehicle Harness Connections and Preparation (cont.)
Part Five: Vehicle Side Plug Relocation and Antenna Adapter
Step 1
Unplug the Green and Gray
or Mustard and Gray (IOB)
connectors from the factory tuner
and re-route them down and
through the left opening of the
lower CD/DVD area.
Section 3: Interface and Main Harness Connections and Preparation
Part One: RP5-GM51 Radio Interface Connections
Step 1
Using a small flat-blade
screwdriver or similar, set the
Radio Select Dial on the side of
the RP5-GM51 to Number 4.
®
Pacific Accessory Corporation
Step 2
Unplug the Black antenna cable
from the factory tuner and re-route
it down and through the right side
opening of the lower CD/DVD area.
Step 2
Remove the warning sticker on
Vehicle Connections port on the
other side of the RP5-GM51
module.
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
Stinger HEIGH10 Radio Replacement Kit
®
for select 2014-2019 Silverado/Sierra Truck
Step 3
Connect the BAA22 Antenna
adapter to the factory antenna.
1
x
Step 3
Connect the four connectors from
the SR-GM14H-HAR-A Main
Harness to the indicated ports on
the RP5-GM51 module.
Rev: V1
Date: 030121
2
3
x
4
Page 10