Equalizer; Factory Eq - AAMP Global PAC SR-GM14H Manual

SOUND SETTINGS
3 2
Settings > Sound Settings
Balance [-9 - 0 - 9]
1
Using the Left and Right arrows, adjusts the
speaker balance Left/Right.
Fader [-9 - 0 - 9]
2
Using the Up and Down arrows fades the
speakers Front/Rear.
Center
3
Press to set balance and fade to zero (0)
Audio Menu Bar
4
Access to Equalizers, Crossovers and Time
Correction
6
30
StingerElectronics.com
4
1
Advanced Settings
5
Access to gain/volume settings, Toslink,
microphone settings. (See page 34)
Loudness [ON-OFF]
6
When ON, boosts low and high frequencies
when listening at lower volume
Subwoofer [ON-OFF]
7
Turns subwoofer output ON/OFF
Phase [0°-180°]
8
Changes phase of subwoofer signal.
Sub Level [0-15]
9
Adjusts volume level of subwoofer output.
Sound Settings > Equalizer
Selecting Equalizer from the Audio Menu Bar
will bring up the 15 band graphic equalizer
and presets. Frequency adjustments can be
made by touching and sliding the frequency
sliders up/down. Once the desired sound is
5
acheived, it can be saved as a Preset.
6
7
8
Saving EQ Settings
9
There are 6 user Presets that can be used to
save EQ settings. This is usefull for having EQ
settings for differnet types of music, volume
levels or for different sources.
When you are done adjusting the EQ, touch
and hold a Preset location to save the
settings. The Preset will highlight.
Sound Settings > Factory EQ
Selecting Factory EQ from the Audio Menu
Bar will access factory equalizer presets for
different music types.
Rock - Hip-Hop - Electronic - Jazz - Pop
When a Factory EQ preset is selected, it can
be fine-tuned using the Equalizer and then
re-saved as a User Preset.
SOUND SETTINGS
StingerElectronics.com
31