AAMP Global PAC SR-GM14H Manual page 12

SR-GM14H
Section Four: Display Mounting Panel Preparation
Part One: Transferring the Climate Controls
Step 1
With the factory radio display /
climate control panel face down,
apply slight pressure to the front
of the controls while releasing the
locking tabs around the perimeter.
Part Two: Mounting the Display
Insert the display into the front of
the mounting panel and carefully
turn the panel over while holding
®
Pacific Accessory Corporation
Once all the clips are released,
remove the climate controls from
the factory bezel.
Step 1
the display in place.
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
Stinger HEIGH10 Radio Replacement Kit
for select 2014-2019 Silverado/Sierra Truck
Step 2
Attach the display to the panel
using four M4 x 10 screws from
the HEIGH10 hardware pack.
®
Step 3
Align the controls in the HEIGH10
mounting panel and push to seat
and lock all the retaining clips.
Step 2
Rev: V1
Date: 030121
Page 12