Pairing A Device; Bt Device Settings - AAMP Global PAC SR-GM14H Manual

Bluetooth PHONE

Pairing a Device

Select Settings from the Phone main
1
menu to go to BT Device Settings.
Select Devices  on the BT Device
2
settings page.
Place your device in Discoverable Mode.
3 Select ADD on the Devices page
4
Select your device from the list.
NOTE!
If your device does not appear in the
device list, confirm it is discoverable
and select Retry
Select Connect to initiate pairing
5
10
StingerElectronics.com
5
6 Select Pair when prompted.
Confirm Key Code on device and
select Pair on device.
1 If prompted, select Allow to share
contacts
NOTE!
2
Once a device is paired, it will automatially
connect whenever the system is turned on
and the device is within range. To manually
connect or connect to a different device go
to Phone > Settings > Devices

BT Device Settings

Once a device is paired and connected,
settings can be set on the BT Device
Settings page.
3
Devices 
Access list of all devices in memory.
Connect/Add/Delete devices.
Auto Connect [ON/OFF]
Set to ON if you want the device to
automatically connect when the system is
turned on.
Pin Code [CHANGE]
Change the pin code for Bluetooth
connection. The default pin code is "1234"
4 Microphone [Internal/External]
Set to External if external microphone is
installed. Set to Internal to use the microphone
located on the front of the display.
Microphone Gain [0-6]
Adjusts the volume (sensitivity) of the
microphone when using hands free phone.
StingerElectronics.com
Bluetooth PHONE
6
11