AAMP Global PAC SR-GM14H Manual page 17

SR-GM14H
Stinger HEIGH10 Radio Replacement Kit
®
for select 2014-2019 Silverado/Sierra Truck
Reset / Restoring Interface Factory Settings
You can restore the RadioPRO interface module to factory default settings by pressing and holding the programming button
on the side of the module until the status LED starts blinking red. Once the LED starts blinking red, release the button. You
must release the button while the LED is blinking red in order to perform the reset. This reset will restore all settings to factory
defaults.
Technical Support
Email: support@PAC-audio.com
Phone: 866-931-8021
International: 727-592-5991
® Rev: V1
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
Page 17
Date: 030121
Pacific Accessory Corporation