Ppm - HP ProLiant DL585 Maintenance And Service Manual

4. Remove the processor memory board.
Figure 11 Removing a processor memory board
Reverse the steps to install a processor memory board.

PPM

To remove a Power Processor Module (PPM):
1. Power down the server. See "Powering down the server" earlier in this chapter.
2. Extend the server from the rack. See "Extending the server from the rack" earlier in this chapter.
3.
Remove the access panel. See "Removing the access panel" earlier in this chapter.
4. Remove the processor memory board. See "Processor memory boards" earlier in this chapter.
5. Remove the PPM from the processor memory board.
Figure 12 Removing a PPM
Reverse the steps to install a PPM.
All manuals and user guides at all-guides.com
Removal and replacement procedures 21