Table of Contents
Advertisement
PROCEDURE FOR FUNCTIONAL CHECK
OF REPLACEMENT COMPONENTS
1. Phase 7 Microprocessor Controller (Computer) Models
a. Upon completing installation of the replacement microprocessor controller (computer) board, reestablish
power to the dryer.
b. Start the drying cycle by pressing any of the preset cycles in letters A-F.
c. Verify that the applicable indicator lights on the microprocessor controller (computer) board are lit.
(Refer to the illustration below.)
48
SECTION VIII
American Dryer Corp.
113202 - 27
Advertisement
Table of Contents
Need help?
Do you have a question about the AD-115DR and is the answer not in the manual?