Changing Voice Mail Notification Settings; Accessing Your System Voice Mailbox - Cisco LINKSYS one PHM1200 User Manual

Linksys One Communications Solution
4

Changing Voice Mail Notification Settings

When you have a new voice mail message in your voice mailbox, the message waiting
indicator on the phone handset lights up red and you'll also hear a "stutter" dialtone when
you go off hook. If desired, you can disable the stutter dialtone notification as follows:
1. On your phone, press the Voice Mail feature button. If you use the Tasks softkey tab, you
must select Voice Mail > Voice Mail Options > Notification Settings.
2. Select the Disable tab to clear the checkbox next to Stutter Dialtone.
You can enable the stutter dialtone notification at any time by selecting the Enable tab on the
Notification Settings phone screen.

Accessing Your System Voice Mailbox

Each Linksys One phone has one system voice mailbox. However, additional mailboxes can
be enabled. When a system voice mailbox is enabled, a feature button is added to your
phone allowing direct access to the System voicemail The system voice mailboxes are shared
across the entire system.Your phone administrator can assign a maximum of 4 system voice
mailboxes on your phone.
Chapter 4: Using Voice Mail 32
Accessing Your System Voice Mailbox