Making Conference Calls - Cisco LINKSYS one PHM1200 User Manual

Making Conference Calls

You can create a three-way conference call.
If you want to... Then...
1. Place a call to the first participant.
Create a Conference Call
2. Press an intercom button or outside line button and dial the next
participant. This puts the first call on hold.
3. When the second participant answers the call, press Calls
>Conference. The conference button lamp on your phone will
light up green.
4. Select Calls>Join for your first call. The participants are now
connected in a conference call. A total of three participants can
be connected in a call.
When a conference call is in progress, the buttons for the intercoms or
lines involved in the call light up green.
To split conference call participants, select the Calls>Split button.
Leave a Conference Call If you want to leave a conference call that you created, select the
Transfer button. The other call participants will remain on the call
(regular phone call) until they hang up.
End a Conference Call Press Calls>End Call. If you created the conference, all participants
drop and the call ends. Only the person who created the conference
can end it.
22
Linksys One Communications Solution
Chapter 3: Using Your Phone
Using PHM1200 IP Phone Screen Features
3